Name: JOYO 10 Band Graphic Equaliser R-12 Eq Band Controller
SKU: R-12 10 Band Eq Controller
Availability: InStock

JOYO 10 Band Graphic Equaliser R-12 Eq Band Controller

SKU: R-12 10 Band Eq Controller

Please note that we run various advertisements on this website. As an Amazon, eBay & Reverb partner, we have an opportunity to earn commission from any qualifying purchases made. Don’t worry it doesn’t cost you a penny, but by law we must let you know that we monitor this traffic.

Description

The JOYO 10 band Graphic EQ effect pedal is suitable for both Bass and Guitar, giving you shaping control over frequency bands ranging from 31.25Hz to 16 kHz. A 10 band slide control dials in deep lows, fantastic bright mids and crystal clear high-end frequencies. The Illuminated sliders let you easily see what your eq is doing, the R series ambient lights make this pedal stand out. A powder-coated sky blue aluminium housing will mean this EQ will endure prolonged use overtime on the pedalboard.

Achieve a + or -12 dB boost or cut per frequency band

The full regulator band values are:

31.25 Hz
62.5 Hz
125 Hz
250 Hz
500 Hz
1K Hz
2K Hz
4K Hz
8K Hz
16K Hz

On the right side, there is additional independent volume control, + or -12 dB boost making it a perfect boost for making a solo stand out, or pushing a tube amp into overdrive mode.

Illuminated sliders
Dimensions: 125*78.5*48mm
Weight: 316g
Input Impedance: 1MΩ
Input Mono 6.3mm
Output Impedance: 100Ω
Output Mono 6.3mm
Rated current consumption: 30mA
Working Voltage: DC 9V (centre negative)
Signal Bypass Type: True Bypass

The R Series or Revolution series from JOYO are the 4th generations of guitar effects and all feature some very cool ambient LED lighting that will make your board shine.

The lights can be toggled from a switch on the rear of the pedal..3 modes of lighting are available to adjust when they come on, they are :

‘Sync’ to the footswitch – The LED ambient lighting on the front and rear of the pedal shine bright when the footswitch is pressed, also illuminating the LED effect indicator on the top of the pedal.
‘Always’ – The lights are always on, but the pedal is only activated when you press the footswitch and the LED effect indicator comes on.
‘Off’ – Okay, so Tron may not be your favourite and you want to stick to something a little less futuristic. The lights are off, the LED effect indicator comes on when you stomp on it and activate the pedal.